Page History

Horizontal Angle – Controls the custom sun azimuth angle (horizontal rotation).

Vertical Angle – Controls the custom sun altitude angle (vertical rotation).

Image Added

Color Mode – Determines the way the color in the Filter color parameter affects the color of the sun.

Filter – Shifts the V-Ray sun's hue according to the Filter Color parameter. 
Direct – Sets the color of the V-Ray sun to the color in the Filter Color parameter. The intensity of the light no longer depends on the V-Ray Sun's position in the sky. Instead, intensity is controlled through the Intensity Multiplier. 
Override – Sets the color of the V-Ray sun to the color in the Filter Color parameter. The intensity of the light still depends on the V-Ray Sun's position in the sky.

Intensity Multiplier – Determines the brightness of the sun and can be used to reduce the default brightness. 

Size Multiplier – Determines the visible size of the sun. This includes the appearance of the sun disc as seen by the camera and reflections, as well as the blurriness of the sun shadows. See the Size Multiplier example below.

Image Added

Preetham et al – The VThe V-Ray Sky procedural texture is generated based on the Preetham et al. method.
CIE Clear – The V-Ray Sky procedural texture is generated based on the CIE method for clear sky. 
CIE Overcast – The V-Ray Sky procedural texture is generated based on the CIE method for cloudy sky
Hosek et al. – The V-Ray Sky procedural texture is generated based on the Hosek et al. method.
PRG Clear Sky – The V-Ray Sky procedural texture is generated based on the PRG Clear Sky method which has enhanced sunrise and sunset sky.

Horizon Illum. –Specifies the intensity (in lx) of the illumination on horizontal surfaces coming from the sky.

Turbidity – Determines the amount of dust in the air and affects the color of the sun and sky. Smaller values produce a clear, blue sky and sun as seen in rural areas, while larger values make them yellow and orange as seen in a big city's atmosphere. See the Turbidity example below.

Ozone – Affects the color of the light. Values closer to 0.0 make the sunlight yellow, and values closer to 1.0 make it blue. See the Ozone example below.

Image Added 

Ground Albedo

Blend Angle – Specifies the angle in degrees where blending occurs between the horizon line and sky. Values close to 0.0 produce a sharper horizon line, while larger values produce a softer horizon line.

Horizon Offset – Allows the user to manually lower the horizon line.

Image Added 

Clouds () – Enables the clouds.

Density – Controls the clouds density. A higher value leads to more clouds. See the Density example below.

Variety – Controls – Controls the cloud variety in space and shape. See the Variety example below.

Cirrus Amount – Controls – Controls the amount of high-altitude cirrus clouds. See the Cirrus Amount example below.

Height (m) – Controls the clouds height. See the  Height example below.

Thickness (m) – Controls the clouds thickness. See the Thickness example below.

Offset X (m) – Controls the offset in the X direction measured in meters.

Offset Y (m) – Controls the offset in the Y direction measured in meters.

Phase X (%) – Clouds phase in X direction specified in percentage (%).

Phase Y (%) – Clouds phase in Y direction specified in percentage (%).

Ground Shadows – Enables the cloud shadows. Note that it is recommended to use a Dome light with a Sky texture for high quality shadows. See the Clouds Shadows example below.

Image Added

Contrails – When enabled, plane contrails are simulated in the sky.

Contrails Number – Determines the number of contrails generated. See the Contrails Number example below. 
Contrails Strength – Determines the opacity of the contrails. Lower values create less opaque trails, which look older. See the Contrails Strength example below. 
Contrails Distortion – Determines the amount of distortion in the contrails. See the Contrails Distortion example below. 
Contrails Offset X (m) – Offsets the contrails by a given value. See the Contrails Offset example below. 
Contrails Offset Y (m) – Offsets the contrails by a given value.
Contrails Pace (%) – Determines how fast airplane contrails progress along the sky. A value of 100% represents an approximate airplane speed of 800km/h. A value of 0% makes the contrails static. Increasing this multiplier value makes contrails appear faster and persist in the sky for a shorter amount of time. See the Contrails Pace example below.

Image Added 

Dynamic Clouds – Enables the automatic clouds formation. When enabled, the clouds use unique offset and phase values based on the current time of the day.

Wind Direction (deg) – Specifies the wind direction vector rotation in the horizontal plane. A value of 0 means that the clouds move in the positive X direction. Increasing the wind direction value horizontally rotate this vector clockwise.
Wind Speed (m/s) – Specifies the clouds movement speed measured in meters per seconds.
Phase Velocity (%/s) – Specifies the phase change measured in percent of the cycle per second. A value of 1 means that the phase loops to its initial state every 100 seconds. Smaller values result in slower changes and a longer phase loop.

Caustic Photons

Caustic Subdivisions – Determines the number of caustic photons emitted from the light source. Lower values produce noisy results, but render faster. Higher values produce smoother results, but take more time.

Emit Radius – Defines the area around the V-Ray Sun from where the photons are shot.