Versions Compared

Old Version 3

changes.mady.by.user Kristin Ivanova

Saved on

compared with

New Version Current

changes.mady.by.user Kristina Gaytandzhieva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This page provides information about the V-Ray Material node in V-Ray for Cinema 4D.

 


Overview

 

...


Section
Column
width65%
The V-Ray Material node is a very versatile surface that allows for better physically correct illumination (energy distribution) in the scene, faster rendering, and more convenient reflection and refraction parameters. This surface node can be easily set up to simulate a huge variety of surfaces from like plastics to , metals to , glass and more by adjusting a handful of parameters.

Furthermore, with the V-Ray Material, you can apply different texture maps, control the reflections and refractions, add bump and displacement maps, force direct GI calculations, and choose the BRDF for how light interacts with the surface material.

 


For examples of the different parameters' examples, see the Classic V-Ray Material page.


If you wish to disable the material preview or adjust its quality to save processing power, you can do so from the Material Node.

Column
width5%

 


Column
width30%

Image RemovedImage Added

 


Diffuse

 

...


Section
Column
width57%50%

SHADING MODEL

Mode – Gives the ability to switch between the Open PBR shading model and the V-Ray model. The Open PBR model differs in its structure from the V-Ray model. See more about the V-Ray Material Layers in the Render Theory article.

DIFFUSEDiffuse

Color – The diffuse color of the material. Note: the actual diffuse color of the surface also depends on the reflection and refraction colors.

Diffuse Roughness – Used to simulate rough surfaces or surfaces covered with dust (for example, skin, or the surface of the Moon). 

OpacityOPACITY

Color — Controls the transparency of the material, where white is opaque , and black is fully transparent.

SelfSELF-illuminationILLUMINATION

Color –  The self-illumination color of the material.

Self-Illumination Affects GI – When enabled, the self-illumination affects global illumination rays and allows the surface to cast light on nearby objects. Note, however, that it may be more efficient to use area lights or Light Rectangle Lights or the Light node for this effect. 

Compensate Camera Exposure – When enabled, the intensity of the Self-Illumination will be is adjusted to compensate the exposure correction from the VRayPhysicalCamera Physical Camera.

Column
width5%

 


Column
width38%45%

Image RemovedImage Added

 

Reflection

 

...


Section
Column
width57%50%

BRDF Type

 –

– Determines the type of BRDF (the shape of the highlight).

 

GGX – GGX Microfacet

highlight

highlights/reflections. Specular highlights have a bright center with a longer falloff.
Phong – Phong

highlight

highlights/reflections. Specular highlights have a bright center with no falloff.
Blinn – Blinn

highlight

highlights/reflections. Specular highlights have a bright center with a tight falloff.
Ward – Ward

highlight

highlights/reflections.

 Specular highlights have

SpecularF highlights have a bright center with a falloff broader

than Blinn,

than Blinn but tighter

than Microfacet

than Microfacet GTR (GGX).

Color – Specifies the reflection color of the material. Note that the reflection color dims the diffuse surface color. 

 

Glossiness –  Controls the sharpness of reflections. A value of 1.0 means perfect mirror-like reflection; lower values produce blurry or glossy reflections.

Use the Reflection Subdivs parameter below to control the quality of glossy reflections.

 

GGX Tail Falloff – Controls the transition from highlighted areas to non-highlighted areas when the BRDF Type is set to GGX.

Metalness – Controls the reflection model of the material from dielectric (metalness 0.0) to metallic (metalness 1.0). Note that intermediate values between 0.0 and 1.0 do not correspond to any physical material. This parameter can be used with PBR setups coming from other applications. The reflection color should typically be set to white for real-world materials. The metalness amount and its glossiness can be previewed in the viewport; see the example.

Use Roughness

GTR Energy Compensation – Compensates GTR lost energy, and an accurate Fresnel formula for conductors is used for metals. This option is enabled by default for all newly created materials and is hidden from the UI. It is also hidden for Cinema 4D S24 and older versions, where it is forcefully enabled. It is visible in all other older scenes.

Use Roughness – This

 –  This

option controls how Glossiness is interpreted. When Use Roughness is selected, the Glossiness inverse value is used. For example, if Glossiness

  

is set to 1.0 and Use Roughness is selected, this

will result

results in diffuse shading. Conversely, if Glossiness is set to 0.0 and Use Roughness is selected, this

will result

results in sharp reflection highlights. 

Fresnel

Fresnel Reflections — When enabled, makes the reflection strength dependent on the viewing angle of the surface. Some materials in nature (glass etc) reflect light in this manner. Note that the Fresnel effect depends on the

index

Index of

refraction

Refraction as well.

 S

Lock Fresnel IOR – Allows the user to unlock the Fresnel IOR parameter for finer control over the reflections.

Fresnel IOR –  The Index of

reflection

Refraction to use when calculating Fresnel reflections. Normally, this is locked to the Refraction IOR parameter, but you can unlock it for finer control.

Anisotropy

Anisotropy (-1..1) –  Determines the shape of the highlight. A value of 0.0 means isotropic highlights. Negative and positive values simulate "brushed" surfaces. 

Anisotropy Rotation – Determines the orientation of the anisotropic effect in a float value between 0.0 and 1.0 (where 0.0 is 0 degrees and 1.0 is 360 degrees). 

UV Vectors Derivation –

Specifies the method for deriving anisotropy axes:

Assigns a placement texture node and changes its UV coordinates to control the direction of stretching of the highlights.

Local Object Axis

Local object axis

 – Uses a local axis for the anisotropy effect. 

Specified UVW generator – Allows

UV Space – Allows the user to assign a UVW Generator for the anisotropy effect.

Anisotropy Axis – Specifies a local object axis for the anisotropy effect when UV Vectors Derivation is set to Local object axis.

Thin Film

Enable Thin Film – Enables the Thin Film parameter.

Thickness Min (nm) – Determines the minimum thickness of the thin film in nanometers. If no Thickness Blend is applied, only this value is used for the thickness of the thin film.

Thickness Max (nm) – Determines the maximum thickness of the thin film in nanometers. This option is only available when Thickness Blend is applied.

Thickness Blend – Allows a map to be attached that blends the thickness values. If no map is applied, only the Thickness Min (nm) value is used to determine thickness.

Thin Film IOR – Specifies the reflective index of the thin film. A texture can be attached to this slot.

Texture – Specifies a texture file to be used for the Thin Film IOR.

Mix Strength – Specifies the blend amount for the texture file.

Reflection Advanced

Trace Reflections –

Check

Select this

option

checkbox to enable reflections for the material.

Max Depth – The number of times a ray can be reflected. Scenes with lots of reflective and refractive surfaces may require higher values to look correct.

Enable Dim Distance – Allows you to stop tracing reflection rays after a certain distance.

Dim Distance – Specifies a distance, after which the reflection rays

will

are not

be

traced.

Dim Fall-off – A fall off radius for the dim distance.

Reflect on Back Side – When disabled, V-Ray calculates reflections for the front side of objects only. Checking it makes V-Ray calculate the reflections for the back sides of objects too.

Soften – Softens the edge of the BRDF at light/shadow transitions.

Affect Channels – Specifies which channels are affected by the reflectivity of the material.

Color Only – The reflectivity

will affect

affects only the RGB channel of the final render.
Color+alpha – Causes the material to transmit the alpha of the reflected objects, instead of displaying an opaque alpha.
All channels – All channels and render elements

will be

are affected by the reflectivity of the material.

Column
width5%


Column
width45%

Image Added



Anchor
metalGlossy
metalGlossy

...

Metalness and glossiness viewport preview

Section
Column
width50%

When the V-Ray Material Node is attached to a geometry in the scene, and you apply Metalness, the amount of Metalness and its Glossiness or Roughness are displayed in the viewport.

 
Column
width5%


Column
width38%45%

Image RemovedImage Added

Coat

 

...


Section
Column
width57%50%

Coat Color – Determines the color of the coat layer's color.

Coat Amount – Specifies the blending weight of the coat layer. A value of 0 does not add a coat layer, while higher values blend the coat gradually. S

Coat Darkening – The coat is darkened due to multiple reflections within it. This mimics the effect of coats such as varnish, which have this effect on their bases. The darkening effect increases as the Coat IOR increases, and there is no darkening if the base is white. 

Coat Glossiness – Controls the sharpness of reflection. A value of 1.0 means perfect glass-like reflection; lower values produce blurry or glossy reflections. If Reflection Use Roughness is usedenabled, this parameter works as Coat Roughness.

Coat IOR – Specifies the Index of Refraction for the coat layer.

Bump

Coat Bump Lock – When enabled, it prioritizes the base bump map during rendering over the coat bump map. You can use it to temporarily hide the coat bump.

Coat Bump Map – Specifies the bump/normal map used as a coat bump.

Coat Bump Amount – A multiplier for the coat bump effect.

Coat Bump Type – Allows the user to specify whether a bump map or a normal map effect is added.

Bump Map
Normal map Map in tangent spaceTangent Space
Normal map Map in object spaceObject Space
Normal map Map in screen spaceScreen Space
Normal map Map in world spaceWorld Space
From texture bump outputTexture Bump Output
Explicit Normal

Column
width5%

 


Column
width38%45%

Image RemovedImage Added

 

Refraction

...

...


Section
Column
width57%50%
Color – Specifies the refraction color of the material. Note that the actual refraction color depends on the reflection color as well. 

Refraction Glossiness – Controls the sharpness of refractions. A value of 1.0 means perfect glass-like refraction; lower values produce blurry or glossy refractions. 

Refraction IOR –  Index of refraction Refraction for the material, which describes the way light bends when crossing the material surface. A value of 1.0 means the light will does not change direction. 

Affect Shadows – This parameter causes the material to cast transparent shadows to create a simple caustic effect dependent on the refraction color and the fog color. For accurate caustic calculations, disable this parameter and instead enable Causticsenable Caustics. Simultaneous usage of both Caustics and Affects Shadows can be used for artistic purposes but does not produce a physically correct result.

Refract Thin Walled – When enabled, the Fog Scattering mode is set to SSS. It simulates thin translucent surfaces such as soap bubble, leaves, curtains, etc. The SSS color Color defines the backside color, while the SSS amount Amount controls the translucency effect.

Translucency

Translucency Type – Selects the algorithm for calculating translucency (also called sub-surface scattering). Note that refraction must be enabled for this effect to be visible.

None – When selected, the only available parameters are the Fog colorColor and Fog depthDepth. Together with the Refraction colorthe Refraction Color, they determine the attenuation of light as it passes through the material. In this mode, there is no subsurface scattering.
Volumetric – Works together with the Refraction color to Color to scatter light inside the object. It is useful for liquids and other highly transparent materials. The Refraction color and Refraction glossiness determine respectively Color and Refraction Glossiness determine, respectively, how much of the object's interior of the object is visible and how rays interact with the object’s surface.
SSS – Works independently of the Refraction colorColor/Glossiness and is useful for skin, wax, marble and other relatively opaque materials.

None

Fog colorColor – The attenuation of light as it passes through the material. This option helps simulate the fact that thick objects look less transparent than thin objects. Note that the effect of the fog color depends on the absolute size of the objects and is therefore scene-dependent. 

Depth (cm) – Controls the strength of the fog effect. Higher values reduce the effect of the fog, making the material more transparent. Smaller values increase the fog effect, making the material more opaque.

Volumetric

SSS amountAmount – Blends between full scattering and pure refraction.

Scatter color Color – Controls the scattering. This parameter can be mapped with a texture.

Fog colorColor – Controls the absorption of the material. This parameter can be mapped with a texture.

Depth (cm) – Controls the strength of the fog effect. Higher values reduce the effect of the fog, making the material more transparent. Smaller values increase the fog effect, making the material more opaque.

SSS

SSS amountAmount – Blends between the diffuse color of the material and the SSS effect by reducing the diffuse component of the material and replacing it with the sub-surface scattering effect.

SSS colorColor – Determines the overall surface appearance. This parameter  A texture node can be mapped with a textureconnected.

Scatter radiusRadius – Controls how far each of the red/green/components travels inside the volume. This parameter  A texture node can be mapped with a textureconnected.

Scale (cm) – Controls the strength of the SSS effect.

Refraction Advanced

Trace Refractions – Enables refractions for the current material.

Max Depth – The number of times a ray can be refracted. Scenes with lots of refractive and reflective surfaces may require higher values to look correct.

Affect Alpha – Allows the user to specify which channels are going to be affected by the transparency of the material.

Color Only – The transparency affects only the RGB channel of the final render.
Color+alpha – This will cause causes the material to transmit the alpha of the refracted objects, instead of displaying an opaque alpha. 
All channels – All channels and render elements are affected by the transparency of the material.

Enable Dispersion –  Enables the calculation of true light wavelength dispersion. 

Aberration – Allows the user to increase or decrease the dispersion effect. Lowering it widens the dispersion and vice versa.

 
Column
width5%


Column
width38%45%

Image RemovedImage Added

 

Sheen

 

...


Section
Column
width57%50%

Sheen Color – Specifies the sheen color. Sheen is used for cloth materials. A texture node can be connected.

Sheen Amount – Specifies how much the sheen layer overlays the diffuse color. The higher the amount, the more of the sheen color you get. A Texture can be attached to this slot and blended with this value, using the Mix Strength option.

Sheen Glossiness – Controls the sharpness of reflections. A value of 1.0 means that all of the light reaches the diffuse color, and when the value is smaller, the cloth material looks glossier.

 
Column
width5%


Column
width38%45%

Image Removed

...

Image Added

Bump

...

...


Section
Column
width57%50%
Bump Map – Allows you to select a texture for the bump or normal map. Leaving this unconnected turns off bump/normal mapping.

Bump Amount – A multiplier for the bump map effect.

Bump Type – Determines how the Map Bump Map parameter is interpreted.

Bump mapBump Map – Applies the map as a bump map.
Normal map Map in tangent spaceTangent Space – Applies the map as a normal map in tangent space.
Normal map Map in object spaceObject Space – Applies the map as a normal map in object space.
Normal map Map in screen spaceScreen Space – Applies the map as a normal map in screen/camera space.
Normal map Map in world spaceWorld Space – Applies the map as a normal map in world space.
From texture bump outputTexture Bump Output – The map is applied as determined by map type itself.
Explicit normalNormal – Applies the map as an explicit normal.

Column
width5%

 


Column
width38%45%

Image RemovedImage Added

 

Options

...

...


Section
Column
width57%50%

MATERIAL ID

Material Id Enabled – Enables the use of Material ID.

Material ID – The color used by the Material ID render element. You can also use a shader here.

Multimatte ID – The integer ID of the material to be used by the Multi Matte render element.

ROUND EDGES

Round Edges Enabled – Enables the round edges effect, which uses bump mapping to smooth out the edges of the geometry during render time.

Radius – Specify a radius (in world units) for the Round Edges effect. Since the actual geometry is not being changed and only the normals of the faces are affected, large values may produce undesirable effects.

Consider Same Object Only – When enabled, the rounded corners are produced only along edges that belong to the object, which has the attribute applied. When disabled, rounded corners are also produced along edges formed when the object with the attribute intersects other objects in the scene.

Corners – Choose which edges are considered in the calculation. Possible options are:

Convex and Concave – Considers all edges.
Convex Only – Only applies Round Edges effect to edges with convex angles.
Concave Only – Only applies Round Edges effect to edges with concave angles.

Cutoff

Cutoff 

– A threshold below which reflections/refractions are not

be

traced. V-Ray tries to estimate the contribution of reflections/refractions to the image, and if it is below this threshold, these effects are not computed. Do not set this to 0.0, as it may cause excessively long render times in some cases.

Double-sided – When enabled, V-Ray calculates separately the shading for the back faces of surfaces with this material. When disabled, the back faces are shaded the same as the front faces.

Fix Dark Edges – –  When enabled, fixes dark edges that some times sometimes appear on objects with glossy materials.

LPE Label – Allows a label to be assigned, which can be used to reference the material node in a Light Path Expression. This is especially useful when working with the Light Select render element to evaluate custom light contribution in the scene.

Column
width5%

 


Column
width38%45%

Image RemovedImage Added